Welding smoke dust removal equipment is a device used to treat harmful gases and particles generated during welding. They mainly purify harmful substances in the air through technologies such as filtration, adsorption, and dust removal, protecting the working environment and employee health. The following are the usage steps of welding smoke dust removal equipment:

1. 确定设备位置：将焊烟除尘设备放置在产生焊接烟尘的区域附近，以确保能够有效收集到烟尘。

1. Determine the location of the equipment: Place the welding smoke and dust removal equipment near the area where welding smoke and dust are generated to ensure effective collection of smoke and dust.

2. 连接管道：使用合适的管道连接焊烟排放口和除尘设备。管道长度应尽量缩短，以减少压力损失和阻力。

2. Connecting pipelines: Use suitable pipelines to connect the welding smoke discharge outlet and dust removal equipment. The length of the pipeline should be minimized to reduce pressure loss and resistance.

3. 设置风机和风量：根据焊接过程中产生的烟尘量和排放口位置的远近，调整风机的风量和运行速度。风量需要足够大以将焊接烟尘吸入设备，并保持压差在适当范围内。

3. Set the fan and air volume: Adjust the fan's air volume and operating speed based on the amount of smoke and dust generated during the welding process and the distance of the discharge outlet. The air volume needs to be large enough to suck welding fumes into the equipment and maintain a pressure difference within an appropriate range.

4. 启动除尘设备：打开焊烟除尘设备主电源，并按照设备操作说明启动风机和过滤系统。

4. Start the dust removal equipment: Turn on the main power supply of the welding smoke dust removal equipment and follow the equipment operation instructions to start the fan and filtration system.

5. 定期检查维护：定期检查除尘设备的运行状况，清理或更换过滤器和吸附剂等消耗品。清理过滤器时，应按照操作说明进行操作，避免对设备造成损坏或污染。

5. Regular inspection and maintenance: Regularly check the operation status of dust removal equipment, clean or replace consumables such as filters and adsorbents. When cleaning the filter, follow the operating instructions to avoid damage or contamination to the equipment.

6. 检测效果：使用空气质量监测设备或专业检测仪器，对除尘设备处理后的空气进行监测，确保排放物符合相关标准和规定。

6. Testing effect: Use air quality monitoring equipment or professional testing instruments to monitor the air treated by dust removal equipment, ensuring that the emissions comply with relevant standards and regulations.

请注意，在使用焊烟除尘设备之前，应了解当地的环境保护法规和安全操作规程，并确保设备符合相关的认证和标准要求。同时，为了确保设备的有效性和安全性，应定期进行维护和保养，并遵循厂家提供的操作指南。

Please note that before using welding fume dust removal equipment, it is important to understand local environmental protection regulations and safety operating procedures, and ensure that the equipment meets relevant certification and standard requirements. At the same time, in order to ensure the effectiveness and safety of the equipment, regular maintenance and upkeep should be carried out, and the operating guidelines provided by the manufacturer should be followed.