工业涂装流水线喷涂，是一般水性涂料适用的一种喷涂工艺，但与刷涂相比较，其流变问题更为突出。可适当利用增稠剂调整改善流变性，进行稀释以提高喷涂效率，实际施工若发现稀释过程中流变性质变化过大，这与水性涂料本身属于非溶液体系有关。

Industrial coating assembly line spraying is a spraying process suitable for general water-based coatings, but compared to brushing, its rheological problems are more prominent. Thickening agents can be appropriately used to adjust and improve the rheological properties, and dilution can be carried out to improve spraying efficiency. In actual construction, if it is found that the rheological properties change too much during the dilution process, it is related to the fact that water-based coatings belong to non solution systems.

工业涂装流水线水性涂料涂膜干燥较慢，但在喷涂过程中却相反，在喷枪口附近涂料会出现干燥和凝聚，并堆积起来而形成堵塞。若涂料喷涂离开喷怆口干燥快，到达工件表面后很难形成连续的涂膜。

The drying of water-based coatings on industrial coating assembly lines is slower, but the opposite is true during the spraying process. The coatings will dry and condense near the nozzle, and accumulate to form blockages. If the paint spraying leaves the spray nozzle and dries quickly, it is difficult to form a continuous coating film after reaching the surface of the workpiece.

工业涂装流水线喷涂过程中的雾化也很重要，雾化的好坏将直接影响到涂膜与涂装的实际成效。这一点能通过改善喷涂某些方面性能，如提高喷涂能力、平滑涂层、适应高黏度涂料，减少喷涂时间和雾化损失以提高材料的利用率。

The atomization in the spraying process of industrial coating assembly lines is also important, and the quality of atomization will directly affect the actual effectiveness of the coating film and coating. This can be achieved by improving certain aspects of spraying performance, such as enhancing spraying ability, smoothing coatings, adapting to high viscosity coatings, reducing spraying time and atomization losses, in order to improve material utilization.

工业涂装流水线的工艺需要根据具体的工件形状、结构等来进行，通过实际的喷涂使用来进行验证，只有满足实际涂层与效率要求的涂装，才能在工业生产中被良好应用。斯普瑞涂装，以良好的设备基础助力每一位客户的喷涂所需，欢迎来电咨询!

The process of industrial coating assembly line needs to be based on the specific shape and structure of the workpiece, and verified through actual spraying use. Only coatings that meet the requirements of actual coating and efficiency can be well applied in industrial production. Sprite Coating, with a good equipment foundation, helps every customer's spraying needs. Welcome to call for consultation!

上一篇：涂装生产流水线构造组成介绍
下一篇：车间焊接烟尘除尘器的选择要注意什么？