脉冲布袋除尘器 ：

Pulse bag filter:

工作原理 ：含尘气体通过进风口进入中箱，大颗粒粉尘直接落入尘灰室。细小的烟尘通过除尘器布袋的过滤，被阻挡在布袋外表面，而净化后的空气则通过布袋进入净气室，并通过引风机排入大气。脉冲除尘器通过脉冲喷吹技术实现高效除尘，当滤袋上的粉尘层增厚到一定程度时，控制系统会启动清灰装置，通过脉冲阀喷吹压缩空气，使滤袋迅速膨胀并抖落附着的粉尘，从而恢复其过滤性能。

Working principle: Dust containing gas enters the middle box through the air inlet, and large particles of dust directly fall into the dust chamber. The fine smoke and dust are filtered by the dust collector bag and blocked on the outer surface of the bag, while the purified air enters the clean air chamber through the bag and is discharged into the atmosphere through the induced draft fan. The pulse dust collector achieves efficient dust removal through pulse blowing technology. When the dust layer on the filter bag thickens to a certain extent, the control system will activate the dust cleaning device. Compressed air is blown through the pulse valve to rapidly expand the filter bag and shake off the attached dust, thereby restoring its filtering performance.

化工厂车间除尘设备 ：

Dust removal equipment in chemical plant workshop:

工作原理 ：含尘气体首先进入膨胀灰斗进行预收集，然后通过导流板均匀分布在滤袋之间，灰尘残留在滤袋外表面。为了保持设备阻力在合理范围内，高压气体通过电磁阀产生脉冲射流，使压缩空气从喷口喷出，并通过里管引入滤袋，在瞬间迅速膨胀并抖落灰尘，实现除尘目的。设备采用微机自动控制装置，可根据粉尘情况调整除尘周期和脉冲喷射时间。

Working principle: The dusty gas first enters the expansion ash hopper for pre collection, and then is evenly distributed between the filter bags through the guide plate, leaving dust residue on the outer surface of the filter bags. In order to maintain the resistance of the equipment within a reasonable range, high-pressure gas generates a pulse jet through an electromagnetic valve, causing compressed air to be sprayed out from the nozzle and introduced into the filter bag through the inner pipe, rapidly expanding and shaking off dust in an instant, achieving the purpose of dust removal. The equipment adopts a microcomputer automatic control device, which can adjust the dust removal cycle and pulse spraying time according to the dust situation.

破碎车间除尘器 ：

Dust collector in crushing workshop:

工作原理 ：粉尘在进入除尘设备后，通过物理或化学方式与气体分离，然后被收集起来。净化后的气体被排放到大气中。具体工作原理因不同除尘设备而异，但总体流程包括分离、收集和排放三个步骤。

Working principle: After entering the dust removal equipment, dust is separated from gas through physical or chemical means and then collected. The purified gas is discharged into the atmosphere. The specific working principle varies depending on different dust removal equipment, but the overall process includes three steps: separation, collection, and discharge.

碳素厂除尘器 ：

Carbon plant dust collector:

工作原理 ：含尘气体在引风机引力作用下由进风口切向进入除尘器底部的灰斗，大颗粒粉尘首先落入灰斗，细小粉尘则通过布袋过滤，附着在布袋外表面。净化后的气体穿过布袋进入上箱体，由引风机引出并排入大气。随着粉尘的聚集，布袋表面的粉尘不断增加，达到一定密集度时，控制系统中的PLC会启动清灰程序，通过气缸和离线阀的切换，进行脉冲喷吹清灰，使粉尘剥落并落入灰斗内。

Working principle: Dust containing gas enters the ash hopper at the bottom of the dust collector tangentially through the air inlet under the gravity of the induced draft fan. Large particles of dust first fall into the ash hopper, while small particles are filtered through the bag and attached to the outer surface of the bag. The purified gas passes through the bag and enters the upper box, which is then drawn out by the induced draft fan and discharged into the atmosphere. With the accumulation of dust, the dust on the surface of the bag continues to increase. When it reaches a certain density, the PLC in the control system will start the dust cleaning program. By switching between the cylinder and offline valve, pulse blowing is carried out to clean the dust, causing the dust to peel off and fall into the ash hopper.

打磨车间除尘器 ：

Dust collector in polishing workshop:

工作原理 ：利用负压原理，通过吸风装置将车间空气中的粉尘颗粒吸入除尘器内部。高精度的布袋过滤系统将细微尘埃拦截，只允许洁净空气排出，带来宁静与清新。

Working principle: Using the negative pressure principle, the dust particles in the workshop air are sucked into the dust collector through the suction device. The high-precision bag filter system intercepts fine dust and only allows clean air to be discharged, bringing tranquility and freshness.

橡胶厂除尘器 ：

Rubber factory dust collector:

工作原理 ：含尘气体由进风道进入灰斗，粗尘粒直接落入灰斗底部，细尘粒随气流转折向上进入中、下箱体，积附在滤袋外表面。过滤后的气体进入上箱体至净气集合管，经排风机排至大气。清灰过程通过脉冲阀用压缩空气进行脉冲喷吹，使滤袋上的粉尘剥离并沉降至灰斗，确保滤袋清灰彻底。

Working principle: Dust containing gas enters the ash hopper through the air inlet duct. Coarse dust particles directly fall into the bottom of the ash hopper, while fine dust particles enter the middle and lower boxes upward with the airflow and accumulate on the outer surface of the filter bag. The filtered gas enters the upper box to the clean gas collection pipe, and is discharged to the atmosphere through the exhaust fan. The dust cleaning process is carried out by pulse blowing compressed air through a pulse valve, causing the dust on the filter bag to peel off and settle into the ash hopper, ensuring thorough cleaning of the filter bag.

单机除尘器 ：

Single machine dust collector:

工作原理 ：含尘气体被吸入除尘器箱体内部，粗颗粒粉尘由于重力作用直接落入集尘器，微粒粉尘被滤袋捕集。经过滤袋过滤的洁净气体进入洁净室，最后由风机从出风口排出。清灰过程通过脉冲阀喷吹压缩空气，使滤袋迅速膨胀并抖落粉尘，然后恢复过滤状态。

Working principle: The dusty gas is sucked into the interior of the dust collector box, and the coarse particle dust falls directly into the dust collector due to gravity. The fine particle dust is captured by the filter bag. The clean gas filtered by the filter bag enters the clean room and is finally discharged from the air outlet by the fan. The dust cleaning process uses a pulse valve to blow compressed air, causing the filter bag to rapidly expand and shake off dust, and then restore the filtering state.

这些除尘设备虽然应用场合和具体结构有所不同，但总体工作原理均包括过滤、清灰和排放三个核心步骤，通过不同的技术手段实现车间内粉尘的有效去除和净化。

Although these dust removal devices have different applications and specific structures, their overall working principle includes three core steps: filtration, dust cleaning, and emission. Through different technical means, effective removal and purification of dust in the workshop are achieved.

本文由车间整体除尘设备为您提供，我们的网站是：http://www.sdcjtz.com我们将以全心全意的热情为您提供服务，欢迎您的访问！

The overall dust removal equipment for this workshop is provided by, and our website is: http://www.sdcjtz.com We will provide you with wholehearted enthusiasm and welcome your visit!

上一篇：关于工业车间粉尘除尘设备的介绍
下一篇：工业涂装流水线的种类你知道吗？他们之间的特点是什么呢？