一、涂装流水线用途

　　1、 Application of painting assembly line

　　目前涂装流水线的应用愈发普遍，范围也不断扩大。总体而言，其主要用途是对工件进行喷涂作业，广泛适用于零部件、电器、器械、五金、机械、机电产品、车辆等金属制品的表面处理，以及木制家具、塑料制品等的表面处理。

　　At present, the application of painting assembly lines is becoming increasingly common and the scope is constantly expanding. Overall, its main purpose is to spray paint on workpieces, widely used for surface treatment of metal products such as components, electrical appliances, instruments, hardware, machinery, electromechanical products, vehicles, as well as surface treatment of wooden furniture, plastic products, etc.

　　二、涂装流水线组成

　　2、 Composition of painting assembly line

　　涂装流水线的构成部分大致包括：前处理设备、喷粉系统、喷漆设备、粉末回收设备、加热烘干固化通道、热源系统、电控系统、悬挂输送链等环节，可依据实际工况进行非标准定制。

　　The components of the painting assembly line generally include pre-treatment equipment, powder spraying system, spray painting equipment, powder recycling equipment, heating, drying and curing channel, heat source system, electrical control system, suspension conveyor chain and other links. Non standard customization can be carried out according to actual working conditions.

　　三、涂装流水线工作流程

　　3、 Painting assembly line workflow

　　涂装流水线的工作流程如下：进行涂装作业时，需先对工件做前处理，通常包括除油、除锈、磷化、钝化等步骤。工件经前处理后，表面的油污、锈迹、灰尘会被清除干净，同时在光亮的表面形成一层均匀且粗糙的灰色磷化膜，这层膜既能防锈，又能增强塑粉或油漆的附着能力。之后便可进行预热并喷涂底漆，接着经过烘烤再进行表面喷漆，最后完成高温固化。

　　The workflow of the painting assembly line is as follows: When performing painting operations, the workpiece needs to be pre treated, usually including steps such as oil removal, rust removal, phosphating, passivation, etc. After pre-treatment, the oil stains, rust, and dust on the surface of the workpiece will be cleaned up, and a uniform and rough gray phosphating film will be formed on the bright surface. This film can prevent rust and enhance the adhesion of plastic powder or paint. Afterwards, preheating and primer spraying can be carried out, followed by baking and surface painting, and finally high-temperature curing can be completed.

　　四、涂装流水线使用注意事项

　　4、 Precautions for using painting assembly line

　　使用涂装流水线时，操作人员需依照操作规范进行操作，避免因使用不当对设备造成损害，同时要按时进行保养，这样才能保障设备的工作效率，延长其使用年限。若需要更换配件，应选用原装配套产品，以确保设备正常运行。

　　When using the painting assembly line, operators need to follow the operating specifications to avoid damage to the equipment caused by improper use. At the same time, maintenance should be carried out on time to ensure the efficiency of the equipment and extend its service life. If replacement parts are needed, original matching products should be selected to ensure the normal operation of the equipment.

　　本文由工业涂装流水线友情奉献.更多有关的知识请点击:http://www.sdcjtz.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

　　This article is dedicated to the automatic shot blasting machine and friendship For more information, please click: http://www.sdcjtz.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message

上一篇：了解自动式抛丸机：从实际应用看其优势特点
下一篇：抛丸机常见几种故障及处理方法解析