1、设有专用进口ABB涡轮风机和电机，防止电机烧坏、防过载电路设计，安全性能更高，工作稳定。

1. Equipped with a dedicated imported ABB turbine fan and motor to prevent motor burnout and overload circuit design, with higher safety performance and stable operation.

2、采用内置式中央集中PLC控制方式，集中处理系统设计施工，结构简单，操作方便。

2. Adopting a built-in central centralized PLC control method, the centralized processing system is designed and constructed with a simple structure and convenient operation.

3、脉冲反吹式自动清灰：滤芯采用自动旋转反吹清灰设计，使滤芯表面清灰更加干净，确保除尘器有一个恒定的吸风量；空压机部分为采用高压胶管连接，从底部高压进气，保障净化器始终处于良好工作状态。（可根据用户需求设计为自动或手动控制模式）

3. Pulse back blowing automatic cleaning: The filter adopts an automatic rotating back blowing cleaning design, making the surface of the filter cleaner and ensuring a constant suction air volume of the dust collector; The air compressor section is connected by high-pressure rubber hoses, with high-pressure air intake from the bottom to ensure that the purifier is always in good working condition. (Can be designed as automatic or manual control mode according to user needs)

4、滤筒采用美国进口材料，使用寿命更长，可以过滤0.3μm的粉尘颗粒，对湿性和粘性的粉尘处理效果更佳。滤筒采用聚四氟乙烯材料，表面热覆了一层超细纤维膜，可以直接将粉尘阻接在滤材的表面上；滤料折褶使用，大大增大过滤面积，同时，使除尘器结构更加紧凑；

4. The filter cartridge is made of imported materials from the United States, which has a longer service life and can filter 0.3 μ m dust particles. It has a better treatment effect on wet and sticky dust. The filter cartridge is made of polytetrafluoroethylene material and coated with a layer of ultra-fine fiber membrane on the surface, which can directly block the dust onto the surface of the filter material; The use of filter material folding greatly increases the filtering area and makes the structure of the dust collector more compact;

5、由于采用360度活动万向吸臂，可全方位、多角度吸收烟气，提高了除烟效率，全面保证了车间环境，保障了作业人员的身心健康。

5. Due to the use of a 360 degree movable universal suction arm, it can absorb smoke from all directions and angles, improve smoke removal efficiency, comprehensively ensure the workshop environment, and ensure the physical and mental health of workers.

6、净化器内部针对火灾隐患和大颗粒熔渣采用了三道防护措施，使净化器的寿命更长、安全更可靠。与同体积除尘器相比，焊接烟尘处理器过滤面中生代相对较大，过滤风速较小，阻力小；

6. Three protective measures have been taken inside the purifier to address fire hazards and large particle slag, ensuring a longer lifespan and greater safety and reliability. Compared with the same volume dust collector, the welding smoke and dust processor has a relatively larger filtration surface in the Mesozoic era, lower filtration wind speed, and lower resistance;

7、清洁空气从格栅状排风口方向均匀引导和分散，降噪音效果好。

7. Clean air is evenly guided and dispersed from the direction of the grid shaped exhaust outlet, resulting in good noise reduction effect.

8、采用专用的万向脚轮，方便设备在车间随意移动和定位。

8. Using dedicated universal casters, it is convenient for equipment to move and position freely in the workshop.

9、光电控制开、关机，节能省电，悬臂罩带有照明装置，适合低照度环境。

9. Optoelectronic control for on/off, energy-saving and power-saving. The cantilever cover is equipped with lighting devices, suitable for low light environments.

10、净化器内耗材更换方便。

10. The replacement of consumables inside the purifier is convenient.

上一篇：机器人涂装线的应用领域
下一篇：自动式抛丸机在日常工作中如何使用？