准备工作：首先需要检查抛丸机设备的各项部件是否正常，如喷头、除尘系统、输送系统、电气系统等。然后根据待处理金属件的材质和要求选择合适的抛丸媒体。

Preparation work: Firstly, it is necessary to check whether all components of the shot blasting machine equipment are normal, such as the nozzle, dust removal system, conveying system, electrical system, etc. Then select the appropriate shot blasting medium based on the material and requirements of the metal parts to be processed.

上料：将待处理的金属件放入抛丸机的清理室内，注意要避免金属件之间互相碰撞或卡住。

Loading: Place the metal parts to be processed into the cleaning room of the shot blasting machine, taking care to avoid collision or jamming between the metal parts.

成都喷砂生产厂家-抛丸机的使用方法及流程

Chengdu sandblasting manufacturer - usage method and process of shot blasting machine

设定参数：根据金属件的材质、形状、大小和处理要求等设定合适的抛丸机参数，如喷丸速度、转速、喷丸时间、抛丸媒体种类和用量等。

Set parameters: Set appropriate shot blasting machine parameters based on the material, shape, size, and processing requirements of the metal parts, such as shot blasting speed, speed, shot blasting time, type and amount of shot blasting media, etc.

启动设备：按照设备操作说明启动抛丸机，并且确认设备运行正常。

Start the equipment: Follow the equipment operation instructions to start the shot blasting machine and confirm that the equipment is running normally.

进行抛丸清理：将抛丸机的喷头对准待处理的金属件，开始进行抛丸清理。在清理过程中需要注意金属件的位置和状态，以确保清理效果和金属件的安全性。

Perform shot blasting cleaning: Align the nozzle of the shot blasting machine with the metal parts to be processed and begin shot blasting cleaning. During the cleaning process, attention should be paid to the position and condition of the metal parts to ensure the cleaning effect and safety of the metal parts.

清理完成：清理完成后，停止抛丸机设备，取出金属件进行检查和清洁。如需重复清理，则可以重新进行上述步骤。

Cleaning completed: After cleaning is completed, stop the shot blasting machine equipment and remove the metal parts for inspection and cleaning. If repeated cleaning is required, the above steps can be repeated.

成都喷砂生产厂家-抛丸机的使用方法及流程

Chengdu sandblasting manufacturer - usage method and process of shot blasting machine

清理室清理：清理室中会产生一定的噪音、尘土和废料，需要进行清理和处理，以保持清洁和安全。

Cleaning room: There will be a certain amount of noise, dust, and waste generated in the cleaning room, which needs to be cleaned and treated to maintain cleanliness and safety.

需要注意的是，在使用抛丸机时需要佩戴防护设备，如安全眼镜、手套和口罩等，以避免受到抛丸媒体和废料的伤害。同时，根据不同的金属件和要求，选择合适的抛丸媒体和设备参数，以获得佳的清理效果和使用寿命。

It should be noted that when using the shot blasting machine, protective equipment such as safety glasses, gloves, and masks should be worn to avoid injury from shot blasting media and waste. At the same time, according to different metal parts and requirements, choose appropriate shot blasting media and equipment parameters to achieve better cleaning effect and service life.

本文由自动式抛丸机友情奉献.更多有关的知识请点击:http://www.sdcjtz.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from an automatic shot blasting machine. For more information, please click: http://www.sdcjtz.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned

上一篇：多工位焊烟集中除尘设备优势
下一篇：机器人涂装线的产品特点和技术参数