1、每天清洁房内墙壁、玻璃及地台底座，以免灰尘和漆尘积聚。

1. Clean the walls, glass, and floor base of the room every day to avoid the accumulation of dust and paint.

2、每星期清洁进风隔尘网，检查排气隔尘网是否有积塞，如房内气压无故增加时，必须更换排气隔尘网；

2. Clean the intake dust screen every week and check if there are any accumulated plugs in the exhaust dust screen. If the air pressure in the room increases without reason, the exhaust dust screen must be replaced;

3、每工作150h应更换地台隔尘纤维棉；

3. Replace the floor dustproof fiber cotton every 150 hours of work;

4、每工作30oh应更换进风隔尘网，

4. The intake dust screen should be replaced every 30 hours of operation,

5、每月清洁地台水盘，并清洗燃烧器上的柴油过滤装置；

5. Clean the platform water tray every month and clean the diesel filtration device on the burner;

6、每个季度应检查进风和排风电动机的传动皮带是否松弛。

6. Every quarter, the drive belts of the intake and exhaust motors should be checked for looseness.

7、每半年应清洁整个烤漆房及地台网，检查循环风活门、进风及排风机轴承，检查燃烧器的排烟通道，清洁油箱内的沉积物，清洗烤漆房水性保护膜并重新喷涂。

7. Every six months, the entire paint baking room and floor network should be cleaned, the circulating air valve, inlet and exhaust fan bearings should be checked, the smoke exhaust channel of the burner should be checked, the sediment in the oil tank should be cleaned, the water-based protective film in the paint baking room should be cleaned and re sprayed.

8、每年应清洁整个热能转换器，包括燃烧室及排烟通道，每年或每工作1200h应更换烤漆房顶棉。

8. The entire thermal energy converter, including the combustion chamber and exhaust duct, should be cleaned every year, and the painted roof cotton should be replaced every year or every 1200 working hours.

上一篇：喷漆房废气处理常见的几种方法
下一篇：多工位焊烟净化设备要注意什么？