脉冲布袋除尘器仪表的检测和控制内容：

　　The detection and control content of pulse bag filter instrument:

　　1）脉冲布袋除尘器仪表概述

　　1) Overview of Pulse Bag Dust Collector Instrument

　　仪表及自动化设计是根据自动化仪表和计算机的设计技术规范和工艺要求进行的。设计范围除尘系统本体的过程检测与控制。

　　The design of instruments and automation is based on the technical specifications and process requirements for the design of automation instruments and computers. Design scope: Process detection and control of the dust removal system body.

　　除尘系统及输灰系统生产过程参数的数据采集、控制、显示、报警等功能均由除尘器厂家PLC控制系统完成。

　　The data collection, control, display, alarm and other functions of the production process parameters of the dust removal system and ash conveying system are all completed by the dust collector manufacturer's PLC control system.

　　1除尘系统本体

　　1. Dust removal system body

　　·除尘器压差；

　　·Differential pressure of dust collector;

　　·脉冲阀喷吹；

　　·Pulse valve blowing;

　　·离线阀通断；

　　·Offline valve on/off;

　　·灰斗振打；

　　·Ash bucket vibration;

　　3）设计原则

　　3) Design principles

　　按“三电一体化（EIC）”的原则，完成该工程的自动化仪表设计。

　　According to the principle of "Integrated Electrical and Mechanical Engineering (EIC)", complete the automation instrument design for this project.

　　生产过程参数的数据采集、控制、显示、报警等功能均由PLC完成。

　　The data collection, control, display, alarm and other functions of production process parameters are all completed by PLC.

　　4）仪表选型

　　4) Instrument selection

　　项目所有仪表、电动调节阀门、气动调节阀门、切断阀等控制阀门；将依据技术、稳定可靠、经济实用的原则选用。

　　All instruments, electric control valves, pneumatic control valves, shut-off valves and other control valves of the project; The selection will be based on the principles of technology, stability, reliability, and economic practicality.

　　其余相关参量检测均采用实用的相关仪表产品。

　　The detection of other relevant parameters is carried out using practical related instrument products.

　　7）脉冲布袋除尘器仪表接地系统

　　7) Pulse bag filter instrument grounding system

　　接地系统由电气统一考虑，电气、仪表、计算机设置综合接地网，接地电阻小于1欧姆。接地网由甲方负责提供。

　　The grounding system is considered by the electrical department, and a comprehensive grounding network is set up for electrical, instrumentation, and computer systems, with a grounding resistance of less than 1 ohm. The grounding grid shall be provided by Party A.

　　本文由 车间整体除尘设备 友情奉献.更多有关的知识请点击   http://www.sdcjtz.com  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the workshop's overall dust removal equipment. For more related knowledge, please click http://www.sdcjtz.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned

上一篇：涂装生产线到底多少钱？
下一篇：什么叫喷粉线?(喷粉流水设备)具有哪些优势？